PALADIN PAINTS & CHEMICALS PRIVATE LIMITED
Non Reactive Diluent

Non Reactive Diluent

Send Inquiry

We are engaged in the manufacturing of varied chemical compounds and our Non-Reactive Diluent is one such of our offered range. It has excellent water and chemical resistance and so it is used as industrial coating in marine, construction and various industries. The solution is used to reduce the viscosity of varied resins and chemicals. As an eminent manufacturer of the industry we never compromise with the quality of the chemical solutions and because of which we have gained recognition in the chemical industry.

Advantages :

  • Very good compatibility with bis-phenol-A, bis-phenol-F & phenolic epoxies
  • Low viscosity
  • Excellent flexibility
  • Excellent chemical & water resistance
  • Useful for low VOC products
  • Increased thermal shock resistance
  • Maintains electrical properties
  • Light & stable colour

Applications : In high solids epoxy resin systems as non reactive diluent in case of

  • Marine
  • Industrial & concrete coatings to reduce VOC without affecting the over all performance of epoxy coating system
  • Formulator could develop light & colour stable epoxy coating systems for low VOC / solvent less requirements

It has excellent end use in modification of

  • Epoxy resins
  • Alkyd resins
  • Urethane resins

Typical Properties :

Property

Unit

Specification

Appearance

Visual

Clear Pale Yellow Liquid

Colour

Gardner

6 Max

Viscosity @25° C

cPs

500 - 700

NVM (1 HR @105° C )

%

Solvent Free

Hydroxyl Value

mg KOH / g

200 - 215

Flash Point ( Closed Cup )

° C

> 200

Density @25° C

g / cm3

0.975 - 0.995

PHR (Liquid Resin EEWT-190)

--

2 - 20

Storage & Stability

Paladin P - 7021 has storage stability of 1 year. Containers with this chemical should be kept tightly closed to avoid contamination. It is to be stored in cool & dry place.

Handling Precautions

May be harmful if ingested or absorbed through the skin & can cause sensitization. Will cause severe inflammation in contact with eye & skin. Wash thoroughly after handling. Adequate ventilation is essential during application. Containers
should be tightly closed when not in use or during transportation. Do not inhale mist or vapours. It .is recommended to
use gloves, safety glasses & protective clothing for safe handling.

First AID : In case of

  • Inhalation : Remove to fresh air & give oxygen if breathing is difficult
  • Ingestion : Give plenty of water. Do not induce vomiting. Contact a physician
  • Contact with Eyes : Flush eyes with plenty of clean water for at least 15 minutes
  • Contact with skin : Immediately wash with mild soap & water